Recently, our company successfully shipped two products, turntable 205 and turntable 275

The rotary table is one of the lifting equipment of the oil drilling rig. In drilling operations, it is mainly used to rotate the drill string and support the weight of the downhole drill string (or casing string) when tripping and running casing. The rotary table can be used for chain drive or cardan shaft drive. When ordering separately, the user must specify the turntable with which transmission method is required.

 

These are the two kinds of customized rotary tables we have exported.

 

ZP275 rotary table complete with MSPC275 rotary insert, and a manual wedge grip for SDML 4 1/2" (Ø114.3mm) drill pipes.
Inside diameter – 698.5mm (27.5”);
The maximum static load - 4500kN;
The maximum operating torque - 27.5kN.m;
The maximum turnover - 300 rpm;
The speed ratio - 1:3.68;
Dimensions:
Length – 2380mm;
Width – 1680mm;
Height – 685mm;
Weight – 6930kg:

Install a chain drive sprocket Z=25 (P3500022AA) on the rotor shaft;

The supplied rotor comply with the SY/T5531-1992 standard and API 7K requirement;

Parameters of the ZP-275 rotor insert;

Type - MSPC275;

Inner liner tab – 1903 (11 3/4” – 13 3/8”);

Inner liner tab – 1904 (9 5/8” – 10 ¾”);

Inner liner tab – 1810 (2 3/8” – 8 5/8”);

The outer diameter of the liner - Ø696.9mm;

The height of the liner - 450mm;

The width of the outer square of the liner - 712.8mm;

The width of the inner square of the liner - 344.5mm;

Manual wedge grip for SDML 4 1/2" drill pipes (Ø114.3mm).

 

ZP205 rotary table complete with MSPC205 rotary insert, and a manual wedge grip for SDML 4 1/2" (Ø114.3mm) drill pipes.
Inside diameter – 520.7mm (20.5”);
The maximum static load - 3000kN;
The maximum operating torque - 23kN.m;
The maximum turnover - 300 rpm;
The speed ratio - 1:3.22;
Dimensions:
Length – 2282mm;
Width – 1480mm;
Height – 665mm;
Weight – 5560kg:

Install a chain drive sprocket (28A-2) Z=23 (P3500045AA) on the rotor shaft;

The supplied rotor comply with the SY/T5531-1992 standard and API 7K requirement;

Parameters of the ZP-205 rotor liner;

Type - MSPC205;

Inner liner tab – 1902 (9 5/8” – 10 ¾”);

Inner liner tab – 1809 (2 3/8” – 8 5/8”);

The outer diameter of the liner - Ø619.1mm;

The height of the liner- 450mm;

The width of the outer square of the liner is 536.6mm;

The width of the inner square of the liner is 344.5mm;

Manual wedge grip for SDML 4 1/2" drill pipes (Ø114.3mm).

 

                                               ZP275                                                                                                    ZP205