Xj350/Xj450/Xj550/Xj650/Xj750/Xj850
Yingpai
Model NO.
H
Hydraulic system
Function: hydraulic system is used for Leveling jacks, mast raising oil tank, mast telescoping oil tank, workover hydraulic clamp.
Air system
The pneumatic system mainly consists of air supply system, engine throttle control system and drawworks air control system. air supply system adopt gas source of vehicle and equipped with FRL Combination.
Air control valve of main drum is installed in the operation room and used to control clutch of main drum, operation room is equipped with control valve of main drum, drawworks emergency braking valve, crash-proof reset valve,
Electrical system
Lamps circuit for chassis: 24v
Install side marker light according to GB4785, GB7258 and other compelling standard requirements.
| Model | XJ750 | Transmission | Allison M5610HR × 2 | ZJ40CZ |
| Drilling Depth | 3,000m (9,840ft, 4-1/2'' DP) | 630 HP×2 (470 KW×2) | ||
| Workover Depth | 8,000m (26,200ft, 2-7/8'' DP) | Net. Height | 38m (125ft) | 2250kN |
| 6,500m (21,330ft, 3-1/2''DP) | Max. Hook Load | 1,700kN (382,000 lbf) | 1150KN | |
| 5,000m(16,400ft, 4-1/2''DP ) | Effective Lines | 10 | 1000HP | |
| Max. Hook Load | 1,700kN(382,000lbf ) | Racking Board Capacity | 3,000m (9,840ft, 4-1/2'' DP) | Hydraulic+ Mechanical |
| Wireline Dia. | Φ29mm (1-1/8'' ) | Racking Board Height | 24m (79ft) | 14×10 |
| Traveling System | 6×5 | Max. Wind Velocity | 30m/s (98ft/s) | 4000m |
| Overall Dimensions(L×W×H) | 22.2×3.1×4.45m72.8×10.2×14.6ft | Drawwork | 38m | |
| Weight | 76,000kg (1676,000 lbs) | Rated Power | 373kW(500hp) × 2 | 6m |
| Max. Travel Speed | 45km/h (28mph) | Main Drum | Φ528mm×1041mm(Φ20.8''×41'') | Ф32mm |
| Carrier | Self-propeller 14×8 | Max. Faster Line Pull | 280kN (62300lbf) | 21MPa |
| Engine | Cat C15 ACERT AIII × 2 | Sanding Drum | Φ315 ×1,005mm(Φ12.4'' ×39.6'') | 0.8MPa |
| Power of Engine | 325kW(440hp)/2,100r/min | Air Assist Brake System | KOBELT Disc4-10.5-48.5'' | 6×5 |
| Overall Size (m) | 19.37×3.05×4.49m | 20.1×3.05×4.49 | 23×3.2×4.8 | 23×3.2×4.8 |
| Weight (kg) | 52000 kg | 58000Kg | 85000 kg | 85000 kg |
Mast of Xj450 Truck Mounted Drilling Rig
Drawworks & Crown block of Xj450 Truck Mounted Drilling Rig
3T Winch of Xj450 Truck Mounted Drilling Rig
Weight Indicator & Deadline Anchor of Xj450 Truck Mounted Drilling Rig
Yingpai Drilling Machinery focus on Xj450 Truck Mounted Drilling Rig for sale at low cost. Using Xj450 Truck Mounted Drilling Rig to much improve the efficiency of the transportation of drilling rigs and workover rigs. Contact us to get free quotation and more details of Xj450 Truck Mounted Drilling Rig.
Model NO.
H
Hydraulic system
Function: hydraulic system is used for Leveling jacks, mast raising oil tank, mast telescoping oil tank, workover hydraulic clamp.
Air system
The pneumatic system mainly consists of air supply system, engine throttle control system and drawworks air control system. air supply system adopt gas source of vehicle and equipped with FRL Combination.
Air control valve of main drum is installed in the operation room and used to control clutch of main drum, operation room is equipped with control valve of main drum, drawworks emergency braking valve, crash-proof reset valve,
Electrical system
Lamps circuit for chassis: 24v
Install side marker light according to GB4785, GB7258 and other compelling standard requirements.
| Model | XJ750 | Transmission | Allison M5610HR × 2 | ZJ40CZ |
| Drilling Depth | 3,000m (9,840ft, 4-1/2'' DP) | 630 HP×2 (470 KW×2) | ||
| Workover Depth | 8,000m (26,200ft, 2-7/8'' DP) | Net. Height | 38m (125ft) | 2250kN |
| 6,500m (21,330ft, 3-1/2''DP) | Max. Hook Load | 1,700kN (382,000 lbf) | 1150KN | |
| 5,000m(16,400ft, 4-1/2''DP ) | Effective Lines | 10 | 1000HP | |
| Max. Hook Load | 1,700kN(382,000lbf ) | Racking Board Capacity | 3,000m (9,840ft, 4-1/2'' DP) | Hydraulic+ Mechanical |
| Wireline Dia. | Φ29mm (1-1/8'' ) | Racking Board Height | 24m (79ft) | 14×10 |
| Traveling System | 6×5 | Max. Wind Velocity | 30m/s (98ft/s) | 4000m |
| Overall Dimensions(L×W×H) | 22.2×3.1×4.45m72.8×10.2×14.6ft | Drawwork | 38m | |
| Weight | 76,000kg (1676,000 lbs) | Rated Power | 373kW(500hp) × 2 | 6m |
| Max. Travel Speed | 45km/h (28mph) | Main Drum | Φ528mm×1041mm(Φ20.8''×41'') | Ф32mm |
| Carrier | Self-propeller 14×8 | Max. Faster Line Pull | 280kN (62300lbf) | 21MPa |
| Engine | Cat C15 ACERT AIII × 2 | Sanding Drum | Φ315 ×1,005mm(Φ12.4'' ×39.6'') | 0.8MPa |
| Power of Engine | 325kW(440hp)/2,100r/min | Air Assist Brake System | KOBELT Disc4-10.5-48.5'' | 6×5 |
| Overall Size (m) | 19.37×3.05×4.49m | 20.1×3.05×4.49 | 23×3.2×4.8 | 23×3.2×4.8 |
| Weight (kg) | 52000 kg | 58000Kg | 85000 kg | 85000 kg |
Mast of Xj450 Truck Mounted Drilling Rig
Drawworks & Crown block of Xj450 Truck Mounted Drilling Rig
3T Winch of Xj450 Truck Mounted Drilling Rig
Weight Indicator & Deadline Anchor of Xj450 Truck Mounted Drilling Rig
Yingpai Drilling Machinery focus on Xj450 Truck Mounted Drilling Rig for sale at low cost. Using Xj450 Truck Mounted Drilling Rig to much improve the efficiency of the transportation of drilling rigs and workover rigs. Contact us to get free quotation and more details of Xj450 Truck Mounted Drilling Rig.